====== Peugeot e-208 und Ladegedöns ======

Sicherheitskritische Daten auf https://passbolt.netzwissen.de 

===== Wallbox openWB =====

  * openWB custom
  * http://192.168.172.39

===== PSACC =====

   * https://github.com/flobz/psa_car_controller
   * http://192.168.72.40:8080

==== Start application ====

<code>
/usr/bin/python3 /opt/psacc/server.py -f config.json -c charge_config1.json -r \
-m t.rother@netzwissen.de -P Pp7RLxRM -l 192.168.72.40 -p 8080
</code>

**Get the car state**

<code>
curl http://192.168.72.40:8080/get_vehicleinfo/VR3UHZKXZMT032161
</code>

**Get the car state from cache to avoid to use psa api too much**

<code>
curl http://192.168.72.40:8080/get_vehicleinfo/VR3UHZKXZMT032161?from_cache=1
</code>

**Stop charge**

<code>
curl http://192.168.72.40:8080/charge_now/VR3UHZKXZMT032161/0
</code>

**Set hour to stop the charge to 6am**

<code>
curl http://192.168.72.40:8080/charge_control/VR3UHZKXZMT032161&hour=6&minute=0 
</code>

**Change car charge threshold to 80 percent**

<code>
curl http://192.168.72.40:8080/charge_control/vin=VR3UHZKXZMT032161&percentage=80 
</code>

**Refresh car state (ask car to send its state):**

<code>
curl http://192.168.72.40:8080/wakeup/vin=VR3UHZKXZMT032161
</code>

**Start/Stop preconditioning**

<code>
curl http://192.168.72.40:8080/preconditioning/VR3UHZKXZMT032161/1 or 0
</code>

==== Use the dashboard ====
     
You can add the -r argument to record the position of the vehicle and retrieve this information in a dashboard.    You will be able to visualize your trips, your consumption and some statistics. 

You have to add an api key from https://home.openweathermap.org/ in your config file, to be able to see your consumption vs exterior temperature.

You have to add an api key from https://co2signal.com/ to have your C02 emission by KM (in France the key isn't needed). 

==== Charge price calculation ====

The dashboard can give you the price by kilometer and price by kw that you pay.
You just have to set the price in the config file.

After a successful launch of the app, a config.ini file will be created.
In this file you can set the price you pay for electricity in the following format "0.15".

If you have a special price during the night you can set "night price", "night hour start" and "night hour end". 
Hours need to be in the following format "23h12"?

You can modify a price manually in the dashboard. It can be useful if you use public charge point.




===== EVCC =====

   * https://github.com/andig/evcc/
   * http://192.168.72.40:7070

<code>
/opt/evcc/evcc --log error
</code>

===== APIs =====

   * https://developer.groupe-psa.com
   * Spezifikation V4 https://developer.groupe-psa.io/webapi/b2c/api-reference/specification/

==== Zum Vergleich: Mercedes ME API ====

    * https://developer.mercedes-benz.com/products