Systemd Doku

Alle services listen

systemctl list-units --type=service

Auf "active" filtern

systemctl list-units --type=service --state=active

oder Gesamtüberblick über alle, die gerade laufen

# systemctl list-units --type=service --state=running 
# systemctl --type=service --state=running

Welche Ports werden benutzt?

root@radius01:~# netstat -ltup | grep radius
udp        0      0 *                           554/freeradius      
udp        0      0 *                           554/freeradius      
udp        0      0*                           554/freeradius      
udp        0      0*                           554/freeradius      
udp6       0      0 [::]:radius             [::]:*                              554/freeradius      
udp6       0      0 [::]:radius-acct        [::]:*                              554/freeradius      
udp6       0      0 [::]:42906              [::]:*                              554/freeradius    

journalctl –-list-boots

Auflisten aller Boot Vorgänge - 0 ist der neueste

journalctl –-boot [id]

Auswählen eines bestimmten Bootvorgangs

Some of the most compelling advantages of systemd are those involved with process and system logging. When using other tools, logs are usually dispersed throughout the system, handled by different daemons and processes, and can be fairly difficult to interpret when they span multiple applications. Systemd attempts to address these issues by providing a centralized management solution for logging all kernel and userland processes. The system that collects and manages these logs is known as the journal.

The journal is implemented with the journald daemon, which handles all of the messages produced by the kernel, initrd, services, etc. In this guide, we will discuss how to use the journalctl utility, which can be used to access and manipulate the data held within the journal. General Idea

One of the impetuses behind the systemd journal is to centralize the management of logs regardless of where the messages are originating. Since much of the boot process and service management is handled by the systemd process, it makes sense to standardize the way that logs are collected and accessed. The journald daemon collects data from all available sources and stores them in a binary format for easy and dynamic manipulation.

This gives us a number of significant advantages. By interacting with the data using a single utility, administrators are able to dynamically display log data according to their needs. This can be as simple as viewing the boot data from three boots ago, or combining the log entries sequentially from two related services to debug a communication issue.

Storing the log data in a binary format also means that the data can be displayed in arbitrary output formats depending on what you need at the moment. For instance, for daily log management you may be used to viewing the logs in the standard syslog format, but if you decide to graph service interruptions later on, you can output each entry as a JSON object to make it consumable to your graphing service. Since the data is not written to disk in plain text, no conversion is needed when you need a different on-demand format.

The systemd journal can either be used with an existing syslog implementation, or it can replace the syslog functionality, depending on your needs. While the systemd journal will cover most administrator's logging needs, it can also complement existing logging mechanisms. For instance, you may have a centralized syslog server that you use to compile data from multiple servers, but you also may wish to interleave the logs from multiple services on a single system with the systemd journal. You can do both of these by combining these technologies. Setting the System Time

One of the benefits of using a binary journal for logging is the ability to view log records in UTC or local time at will. By default, systemd will display results in local time.

Because of this, before we get started with the journal, we will make sure the timezone is set up correctly. The systemd suite actually comes with a tool called timedatectl that can help with this.

First, see what timezones are available with the list-timezones option:

timedatectl list-timezones

This will list the timezones available on your system. When you find the one that matches the location of your server, you can set it by using the set-timezone option:

sudo timedatectl set-timezone zone

To ensure that your machine is using the correct time now, use the timedatectl command alone, or with the status option. The display will be the same:

timedatectl status Local time: Thu 2015-02-05 14:08:06 EST Universal time: Thu 2015-02-05 19:08:06 UTC RTC time: Thu 2015-02-05 19:08:06 Time zone: America/New_York (EST, -0500) NTP enabled: no

NTP synchronized: no RTC in local TZ: no

DST active: n/a

The first line should display the correct time.

To see the logs that the journald daemon has collected, use the journalctl command.

When used alone, every journal entry that is in the system will be displayed within a pager (usually less) for you to browse. The oldest entries will be up top:


If you want to display the timestamps in UTC, you can use the –utc flag:

journalctl –utc

While having access to such a large collection of data is definitely useful, such a large amount of information can be difficult or impossible to inspect and process mentally. Because of this, one of the most important features of journalctl is its filtering options. Displaying Logs from the Current Boot

The most basic of these which you might use daily, is the -b flag. This will show you all of the journal entries that have been collected since the most recent reboot.

journalctl -b

This will help you identify and manage information that is pertinent to your current environment.

In cases where you aren't using this feature and are displaying more than one day of boots, you will see that journalctl has inserted a line that looks like this whenever the system went down:

. . . – Reboot – . . .

This can be used to help you logically separate the information into boot sessions. Past Boots

While you will commonly want to display the information from the current boot, there are certainly times when past boots would be helpful as well. The journal can save information from many previous boots, so journalctl can be made to display information easily.

Some distributions enable saving previous boot information by default, while others disable this feature. To enable persistent boot information, you can either create the directory to store the journal by typing:

sudo mkdir -p /var/log/journal

Or you can edit the journal configuration file:

sudo nano /etc/systemd/journald.conf

Under the [Journal] section, set the Storage= option to "persistent" to enable persistent logging: /etc/systemd/journald.conf

. . . [Journal] Storage=persistent

When saving previous boots is enabled on your server, journalctl provides some commands to help you work with boots as a unit of division. To see the boots that journald knows about, use the –list-boots option with journalctl:

journalctl –list-boots - 2 caf0524a1d394ce0bdbcff75b94444fe Tue 2015-02-03 21:48:52 UTC—Tue 2015-02-03 22:17:00 UTC

  1. 1 13883d180dc0420db0abcb5fa26d6198 Tue 2015-02-03 22:17:03 UTC—Tue 2015-02-03 22:19:08 UTC

0 bed718b17a73415fade0e4e7f4bea609 Tue 2015-02-03 22:19:12 UTC—Tue 2015-02-03 23:01:01 UTC

This will display a line for each boot. The first column is the offset for the boot that can be used to easily reference the boot with journalctl. If you need an absolute reference, the boot ID is in the second column. You can tell the time that the boot session refers to with the two time specifications listed towards the end.

To display information from these boots, you can use information from either the first or second column.

For instance, to see the journal from the previous boot, use the -1 relative pointer with the -b flag:

journalctl -b -1

You can also use the boot ID to call back the data from a boot:

journalctl -b caf0524a1d394ce0bdbcff75b94444fe

While seeing log entries by boot is incredibly useful, often you may wish to request windows of time that do not align well with system boots. This may be especially true when dealing with long-running servers with significant uptime.

You can filter by arbitrary time limits using the –since and –until options, which restrict the entries displayed to those after or before the given time, respectively.

The time values can come in a variety of formats. For absolute time values, you should use the following format:


For instance, we can see all of the entries since January 10th, 2015 at 5:15 PM by typing:

journalctl –since "2015-01-10 17:15:00"

If components of the above format are left off, some defaults will be applied. For instance, if the date is omitted, the current date will be assumed. If the time component is missing, "00:00:00" (midnight) will be substituted. The seconds field can be left off as well to default to "00":

journalctl –since "2015-01-10" –until "2015-01-11 03:00"

The journal also understands some relative values and named shortcuts. For instance, you can use the words "yesterday", "today", "tomorrow", or "now". You do relative times by prepending "-" or "+" to a numbered value or using words like "ago" in a sentence construction.

To get the data from yesterday, you could type:

journalctl –since yesterday

If you received reports of a service interruption starting at 9:00 AM and continuing until an hour ago, you could type:

journalctl –since 09:00 –until "1 hour ago"

As you can see, it's relatively easy to define flexible windows of time to filter the entries you wish to see.

We learned above some ways that you can filter the journal data using time constraints. In this section we'll discuss how to filter based on what service or component you are interested in. The systemd journal provides a variety of ways of doing this. By Unit

Perhaps the most useful way of filtering is by the unit you are interested in. We can use the -u option to filter in this way.

For instance, to see all of the logs from an Nginx unit on our system, we can type:

journalctl -u nginx.service

Typically, you would probably want to filter by time as well in order to display the lines you are interested in. For instance, to check on how the service is running today, you can type:

journalctl -u nginx.service –since today

This type of focus becomes extremely helpful when you take advantage of the journal's ability to interleave records from various units. For instance, if your Nginx process is connected to a PHP-FPM unit to process dynamic content, you can merge the entries from both in chronological order by specifying both units:

journalctl -u nginx.service -u php-fpm.service –since today

This can make it much easier to spot the interactions between different programs and debug systems instead of individual processes. By Process, User, or Group ID

Some services spawn a variety of child processes to do work. If you have scouted out the exact PID of the process you are interested in, you can filter by that as well.

To do this we can filter by specifying the _PID field. For instance if the PID we're interested in is 8088, we could type:

journalctl _PID=8088

At other times, you may wish to show all of the entries logged from a specific user or group. This can be done with the _UID or _GID filters. For instance, if your web server runs under the www-data user, you can find the user ID by typing:

id -u www-data

Afterwards, you can use the ID that was returned to filter the journal results:

journalctl _UID=33 –since today

The systemd journal has many fields that can be used for filtering. Some of those are passed from the process being logged and some are applied by journald using information it gathers from the system at the time of the log.

The leading underscore indicates that the _PID field is of the latter type. The journal automatically records and indexes the PID of the process that is logging for later filtering. You can find out about all of the available journal fields by typing:

man systemd.journal-fields

We will be discussing some of these in this guide. For now though, we will go over one more useful option having to do with filtering by these fields. The -F option can be used to show all of the available values for a given journal field.

For instance, to see which group IDs the systemd journal has entries for, you can type:

journalctl -F _GID 32 99 102 133 81

This will show you all of the values that the journal has stored for the group ID field. This can help you construct your filters. By Component Path

We can also filter by providing a path location.

If the path leads to an executable, journalctl will display all of the entries that involve the executable in question. For instance, to find those entries that involve the bash executable, you can type:

journalctl /usr/bin/bash

Usually, if a unit is available for the executable, that method is cleaner and provides better info (entries from associated child processes, etc). Sometimes, however, this is not possible. Displaying Kernel Messages

Kernel messages, those usually found in dmesg output, can be retrieved from the journal as well.

To display only these messages, we can add the -k or –dmesg flags to our command:

journalctl -k

By default, this will display the kernel messages from the current boot. You can specify an alternative boot using the normal boot selection flags discussed previously. For instance, to get the messages from five boots ago, you could type:

journalctl -k -b -5

One filter that system administrators often are interested in is the message priority. While it is often useful to log information at a very verbose level, when actually digesting the available information, low priority logs can be distracting and confusing.

You can use journalctl to display only messages of a specified priority or above by using the -p option. This allows you to filter out lower priority messages.

For instance, to show only entries logged at the error level or above, you can type:

journalctl -p err -b

This will show you all messages marked as error, critical, alert, or emergency. The journal implements the standard syslog message levels. You can use either the priority name or its corresponding numeric value. In order of highest to lowest priority, these are:

0: emerg 1: alert 2: crit 3: err 4: warning 5: notice 6: info 7: debug

The above numbers or names can be used interchangeably with the -p option. Selecting a priority will display messages marked at the specified level and those above it. Modifying the Journal Display

Above, we demonstrated entry selection through filtering. There are other ways we can modify the output though. We can adjust the journalctl display to fit various needs. Truncate or Expand Output

We can adjust how journalctl displays data by telling it to shrink or expand the output.

By default, journalctl will show the entire entry in the pager, allowing the entries to trail off to the right of the screen. This info can be accessed by pressing the right arrow key.

If you'd rather have the output truncated, inserting an ellipsis where information has been removed, you can use the –no-full option:

journalctl –no-full

. . .

Feb 04 20:54:13 journalme sshd[937]: Failed password for root from…h2 Feb 04 20:54:13 journalme sshd[937]: Connection closed by [preauth] Feb 04 20:54:13 journalme sshd[937]: PAM 2 more authentication failures; logname…ot

You can also go in the opposite direction with this and tell journalctl to display all of its information, regardless of whether it includes unprintable characters. We can do this with the -a flag:

journalctl -a

Output to Standard Out

By default, journalctl displays output in a pager for easier consumption. If you are planning on processing the data with text manipulation tools, however, you probably want to be able to output to standard output.

You can do this with the –no-pager option:

journalclt –no-pager

This can be piped immediately into a processing utility or redirected into a file on disk, depending on your needs. Output Formats

If you are processing journal entries, as mentioned above, you most likely will have an easier time parsing the data if it is in a more consumable format. Luckily, the journal can be displayed in a variety of formats as needed. You can do this using the -o option with a format specifier.

For instance, you can output the journal entries in JSON by typing:

journalctl -b -u nginx -o json

{ _ckgedit_QUOT_CURSOR" : "s=13a21661cf4948289c63075db6c25c00;i=116f1;b=81b58db8fd9046ab9f847ddb82a2fa2d;m=19f0daa;t=50e33c33587ae;x=e307daadb4858635", _ckgedit_QUOT_REALTIME_TIMESTAMP" : "1422990364739502", _ckgedit_QUOT_MONOTONIC_TIMESTAMP" : "27200938", _ckgedit_QUOTBOOT_ID" : "81b58db8fd9046ab9f847ddb82a2fa2d", "PRIORITY" : "6", _ckgedit_QUOTUID" : "0", _ckgedit_QUOTGID" : "0", _ckgedit_QUOTCAP_EFFECTIVE" : "3fffffffff", _ckgedit_QUOTMACHINE_ID" : "752737531a9d1a9c1e3cb52a4ab967ee", _ckgedit_QUOTHOSTNAME" : "desktop", "SYSLOG_FACILITY" : "3", "CODE_FILE" : "src/core/unit.c", "CODE_LINE" : "1402", "CODE_FUNCTION" : "unit_status_log_starting_stopping_reloading", "SYSLOG_IDENTIFIER" : "systemd", "MESSAGE_ID" : "7d4958e842da4a758f6c1cdc7b36dcc5", _ckgedit_QUOTTRANSPORT" : "journal", _ckgedit_QUOTPID" : "1", _ckgedit_QUOTCOMM" : "systemd", _ckgedit_QUOTEXE" : "/usr/lib/systemd/systemd", _ckgedit_QUOTCMDLINE" : "/usr/lib/systemd/systemd", _ckgedit_QUOTSYSTEMD_CGROUP" : "/", "UNIT" : "nginx.service", "MESSAGE" : "Starting A high performance web server and a reverse proxy server…", _ckgedit_QUOTSOURCE_REALTIME_TIMESTAMP" : "1422990364737973" }

. . .

This is useful for parsing with utilities. You could use the json-pretty format to get a better handle on the data structure before passing it off to the JSON consumer:

journalctl -b -u nginx -o json-pretty


_ckgedit_QUOT_CURSOR" : "s=13a21661cf4948289c63075db6c25c00;i=116f1;b=81b58db8fd9046ab9f847ddb82a2fa2d;m=19f0daa;t=50e33c33587ae;x=e307daadb4858635", _ckgedit_QUOT_REALTIME_TIMESTAMP" : "1422990364739502", _ckgedit_QUOT_MONOTONIC_TIMESTAMP" : "27200938", _ckgedit_QUOTBOOT_ID" : "81b58db8fd9046ab9f847ddb82a2fa2d", "PRIORITY" : "6", _ckgedit_QUOTUID" : "0", _ckgedit_QUOTGID" : "0", _ckgedit_QUOTCAP_EFFECTIVE" : "3fffffffff", _ckgedit_QUOTMACHINE_ID" : "752737531a9d1a9c1e3cb52a4ab967ee", _ckgedit_QUOTHOSTNAME" : "desktop", "SYSLOG_FACILITY" : "3", "CODE_FILE" : "src/core/unit.c", "CODE_LINE" : "1402", "CODE_FUNCTION" : "unit_status_log_starting_stopping_reloading", "SYSLOG_IDENTIFIER" : "systemd", "MESSAGE_ID" : "7d4958e842da4a758f6c1cdc7b36dcc5", _ckgedit_QUOTTRANSPORT" : "journal", _ckgedit_QUOTPID" : "1", _ckgedit_QUOTCOMM" : "systemd", _ckgedit_QUOTEXE" : "/usr/lib/systemd/systemd", _ckgedit_QUOTCMDLINE" : "/usr/lib/systemd/systemd", _ckgedit_QUOTSYSTEMD_CGROUP" : "/", "UNIT" : "nginx.service", "MESSAGE" : "Starting A high performance web server and a reverse proxy server…", _ckgedit_QUOTSOURCE_REALTIME_TIMESTAMP" : "1422990364737973"


. . .

The following formats can be used for display:

cat: Displays only the message field itself. export: A binary format suitable for transferring or backing up. json: Standard JSON with one entry per line. json-pretty: JSON formatted for better human-readability json-sse: JSON formatted output wrapped to make add server-sent event compatible short: The default syslog style output short-iso: The default format augmented to show ISO 8601 wallclock timestamps. short-monotonic: The default format with monotonic timestamps. short-precise: The default format with microsecond precision verbose: Shows every journal field available for the entry, including those usually hidden internally.

These options allow you to display the journal entries in the whatever format best suits your current needs. Active Process Monitoring

The journalctl command imitates how many administrators use tail for monitoring active or recent activity. This functionality is built into journalctl, allowing you to access these features without having to pipe to another tool. Displaying Recent Logs

To display a set amount of records, you can use the -n option, which works exactly as tail -n.

By default, it will display the most recent 10 entries:

journalctl -n

You can specify the number of entries you'd like to see with a number after the -n:

journalctl -n 20

Following Logs

To actively follow the logs as they are being written, you can use the -f flag. Again, this works as you might expect if you have experience using tail -f:

journalctl -f

Journal Maintenance

You may be wondering about the cost is of storing all of the data we've seen so far. Furthermore, you may be interesting in cleaning up some older logs and freeing up space. Finding Current Disk Usage

You can find out the amount of space that the journal is currently occupying on disk by using the –disk-usage flag:

journalctl –disk-usage

Journals take up 8.0M on disk.

Deleting Old Logs

If you wish to shrink your journal, you can do that in two different ways (available with systemd version 218 and later).

If you use the –vacuum-size option, you can shrink your journal by indicating a size. This will remove old entries until the total journal space taken up on disk is at the requested size:

sudo journalctl –vacuum-size=1G

Another way that you can shrink the journal is providing a cutoff time with the –vacuum-time option. Any entries beyond that time are deleted. This allows you to keep the entries that have been created after a specific time.

For instance, to keep entries from the last year, you can type:

sudo journalctl –vacuum-time=1years

Limiting Journal Expansion

You can configure your server to place limits on how much space the journal can take up. This can be done by editing the /etc/systemd/journald.conf file.

The following items can be used to limit the journal growth:

SystemMaxUse=: Specifies the maximum disk space that can be used by the journal in persistent storage. SystemKeepFree=: Specifies the amount of space that the journal should leave free when adding journal entries to persistent storage. SystemMaxFileSize=: Controls how large individual journal files can grow to in persistent storage before being rotated. RuntimeMaxUse=: Specifies the maximum disk space that can be used in volatile storage (within the /run filesystem). RuntimeKeepFree=: Specifies the amount of space to be set aside for other uses when writing data to volatile storage (within the /run filesystem). RuntimeMaxFileSize=: Specifies the amount of space that an individual journal file can take up in volatile storage (within the /run filesystem) before being rotated.

By setting these values, you can control how journald consumes and preserves space on your server. Conclusion

As you can see, the systemd journal is incredibly useful for collecting and managing your system and application data. Most of the flexibility comes from the extensive metadata automatically recorded and the centralized nature of the log. The journalctl command makes it easy to take advantage of the advanced features of the journal and to do extensive analysis and relational debugging of different application components.


Boot Verlauf prüfen

systemd-analyze critical-chain

Zeitlicher Verlauf bis zum aktuellen target:

systemd-analyze time

Genaue Auflistung aller units:

systemd-analyze dump

Service File prüfen:

systemd-analyze verify [service file]

Grafischer Plot de Startverlaufs für ein Service File

systemd-analyze dot 'openvpn.*' | dot -Tsvg > openvpn.svg

Anzeigen der Units

systemctl list-unit-files -t target -all

oder - timer, -t service. Ohne -all zeigt nur die aktiven:

systemctl list-unit-files -t service

Service > Target Zurdnung

systemctl show -p "Wants"

welche Services werden in einem target angezogen

Eigener Runlevel

siehe, umgesetzt auf tarapiroe für vbox.

Es wird ein eigenes target in /etc/systemd/system angelegt. Dieses target wird nach multi-user gestartet.


Takes a boolean argument. If true, this unit may be used with the systemctl isolate command. Otherwise, this will be refused. It probably is a good idea to leave this disabled except for target units that shall be used similar to runlevels in SysV init systems, just as a precaution to avoid unusable system states. This option defaults to false.

[Unit] Description = Custom Target Requires = After = AllowIsolate = yes

Die units für dieses Target sehen so aus:

[Unit] Description = My last command After = [Service] Type = simple ExecStart = /sbin/last_command [Install] WantedBy =

Dann eigenes Verzeichnis /etc/systemd/system/ anlegen, darin symlinks auf die units, die in diesem Level gestartet werden sollen. Danach systemctl daemon-reload, um Änderungen einzulesen.

Dieser Befehl zeigt alle targets inkl. der nicht laufenden:

systemctl list-units –type target –all

Dies schaltet auf das neue target um.

systemctl isolate

Damit wird das neue Target als default gesetzt (show-default zeigt das aktuelle default target):

systemctl set-default

Starten von Services auf Systemen mit NetworkManager


It is very easy to affect systemd's unit ordering. On the other hand you need to be careful about what a completed unit guarantees.

On current systems, ordering after just guarantees that the network service has been started, not that there's some actual configuration. You need to order after and pull it in to achieve that.

[Unit] For compatibility with older systems, you may need to order after as well.

[Unit] That's for the unit file of your service and for systemd.

  • systemd_journalctl.txt
  • Zuletzt geändert: 05/03/2024 - 10:52
  • von